How to connect a device to your network via WPS on the Beacon 1

To start a WPS connection on Beacon 1 you need to login to the WebGUI using the admin credentials.

Then open the Network section.

Unknown-1.png

Then choose one of the Wireless Bands (2.4 or 5GHz).

Keep in mind that the device will connect to the chosen band. So if you want to connect to the 5GHz network, please click on the “Wireless (5GHz)”.

Unknown-2.png 

Then scroll down to the bottom of the page and click on the button “WPS Connect”.

 Unknown-1.png

When you click on the button, a text message “WPS START” will be displayed next to the button.

Unknown-1.png

At this moment, you can trigger the “WPS connection” feature on your device.

 Unknown-2.png

If the device is successfully connected to the network, a text message “WPS SUCCESS” will be displayed next to the button.

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.